RGB LED BOARD 5050/12V

SKU: RGB5050-12

More Info

中文

这款LED灯板采用三颗RGB5050灯珠,板载拨码开关,通过拨动相应的开关,共有7色可选。
可用于多轴,穿越机,固定翼,直升机,车模等灯光DIY。

参数:

  1. 输入: 10~13V DC,3S LiPo电池,12V BEC
  2. 拨码开关选色
  3. 尺寸: 47*10mm
  4. 重量: 2g
  5. 包装: 12V灯板1片, 红黑电源线30cm

使用方法:

  • 附带一根30cm长红黑电源线,用户需根据所用长短自己裁剪并焊接;
  • 注意输入的正负极性和绝缘;
  • 拨动相应的开关到ON可选择7种颜色;
  • 建议背后用双面泡棉胶粘在机体上;
  • 输入电源10~13V之间均可,可用3S LiPo供电,或者12V BEC。

以下基于12V输入时功率和电流:

  • B ON =蓝色, 0.35W, 0.03A
  • R ON =红色, 0.35W, 0.03A
  • G ON =绿色, 0.35W, 0.03A
  • B+R ON =紫色, 0.70W, 0.06A
  • B+G ON =青色, 0.70W, 0.06A
  • R+G ON =黄色, 0.70W, 0.06A
  • B+R+G ON =白色, 1.05W, 0.09A
English

Matek RGB LED Board 5050/12V comes with three RGB5050 LEDs & one code switch. Seven colors are selectable by means of code switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

Specifications:

  •  INPUT: 10~13V DC
  •  Size: 47*10mm
  •  Weight: 2g
  •  Packing:  LED BOARD 12V, 1pc,   Cable 0.3m
Notes:
  • Comes with a 0.3m long cable, users can cut it to a suitable length;
  • Be ware of the positive and negative poles, as well as the insulation;
  • Switch the related codes to ON, seven colors are selectable;
  • The input is in a range of 10~13V DC, can be powered by 3S Lipo or 12V BEC.
Selectable Colors & Power:
  • B ON =Blue, 0.35W, 0.03A
  • R ON =Red, 0.35W, 0.03A
  • G ON =Green, 0.35W, 0.03A
  • B+R =Megenta, 0.70W, 0.06A
  • B+G =Cyan, 0.70W, 0.06A
  • R+G =Yellow, 0.70W, 0.06A
  • B+R+G =White, 1.05W, 0.09A