RGB LED BOARD 5050/16V

SKU: RGB5050-16

More Info

中文

这款16V灯板专为使用4S LiPo电池的多轴/穿越机设计,可以直接从4S电池取电,采用四颗RGB5050灯珠,板载进口拨码开关,通过拨动相应的开关,共有7色可选。

参数:

  • 输入: 14~17V DC,4S LiPo电池
  • 拨码开关选色
  • 尺寸: 47*10mm
  • 重量: 2g
  • 包装:  16V灯板1片,  红黑电源线30cm

使用方法:

  • 输入电源14~17V之间均可,可用4S LiPo直接供电;
  • 附带一根30cm长红黑电源线,用户需根据所用长短自己裁剪并焊接;
  • 注意输入的正负极性和绝缘;
  • 拨动相应的开关到ON可选择7种颜色;
  • 建议背后用双面泡棉胶粘在机体上;

以下基于16V输入时功率和电流

  • B ON =蓝色,  0.4W, 25mA
  • R ON =红色,  0.4W, 25mA
  • G ON =绿色,  0.4W, 25mA
  • B+R ON =紫色,  0.8W, 50mA
  • B+G ON =青色,  0.8W, 50mA
  • R+G ON =黄色,  0.8W, 50mA
  • B+R+G ON =白色,  1.2W, 75mA
English

The RGB LED Board 5050/16V is designed for the Multi-rotors & FPV Quad-rotors with 4S LiPo power.  It comes with four RGB5050 LEDs & one code switch. Seven colors are selectable by means of code switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

Specifications:

  •  INPUT: 14~17V DC, 4Cells LiPo battery
  •  Size: 47*10mm
  •  Weight: 2g
  •  Packing:  LED BOARD 16V, 1pc,   Cable 0.3m
Notes:
  • Comes with a 0.3m long cable, users can cut it to a suitable length;
  • Be ware of the positive and negative poles, as well as the insulation;
  • Switch the related codes to ON, seven colors are selectable;
  • The input is in a range of 14~17V DC, can be powered by 4S Lipo battery.
Selectable Colors & Power:
  • B ON =Blue, 0.4W, 25mA
  • R ON =Red, 0.4W, 25mA
  • G ON =Green, 0.4W, 25mA
  • B+R =Megenta, 0.8W, 50mA
  • B+G =Cyan, 0.8W, 50mA
  • R+G =Yellow, 0.8W, 50mA
  • B+R+G =White, 1.2W, 75mA