RGB LED CIRCLE X8-16V

SKU: RGBX8-16

More Info

English

Matek RGB LED CIRCLE X8/16V comes with eight RGB5050 LEDs & one code switch. Seven colors are selectable by means of code switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

Specifications:

  • INPUT: 14~16V DC, 4S LiPo
  • Size: Circle  Φ30mm (10mm /Φ3mm Mounting)
  • Select the colors with 3pin 1.25mm Code switch
  • Weight: 2.5g
  • Packing:  LED CIRCLE X8/16V, 1pc,   Cable 0.3m
Notes:
  • Comes with a 0.3m long cable, users can cut it to a suitable length;
  • Be ware of the positive and negative poles, as well as the insulation;
  • Switch the related codes to ON, seven colors are selectable;
  • The input is in a range of 14~16V DC, can be powered by 4S Lipo.
Selectable Colors & Power @16v:
  • B ON =Blue, 0.64W, 0.04A
  • R ON =Red, 0.64W, 0.04A
  • G ON =Green, 0.64W, 0.04A
  • B+R =Megenta, 1.28W, 0.08A
  • B+G =Cyan, 1.28W, 0.08A
  • R+G =Yellow, 1.28W, 0.08A
  • B+R+G =White, 1.92W, 0.12A
中文

圆形 16V LED灯板采用8颗RGB5050灯珠,板载进口拨码开关,通过拨动相应的开关,共有7色可选。单灯板最大功率1.9W,超亮。可用于多轴,穿越机,固定翼,直升机,车模等灯光DIY。

参数:

  • 输入: 14~17V DC,4S LiPo电池
  • 拨码开关选色(7色)
  • 尺寸: 灯板直径30mm,安装孔距10mm,孔径3mm
  • 重量: 2.5g
  • 包装: X8-16V圆形灯板1片, 红黑电源线30cm

使用方法:

  • 附带一根30cm长红黑电源线,用户需根据所用长短自己裁剪并焊接;
  • 注意输入的正负极性和绝缘;
  • 拨动相应的开关到ON可选择7种颜色;
  • 建议背后用双面泡棉胶粘在机体上;例如多轴的电机座下方。
  • 输入电源14~17V之间均可,可用4S LiPo供电。
  • 灯板亮度高,请勿长时间直视。

以下基于16V输入时功率和电流

  • B ON =蓝色,  0.64W, 0.04A
  • R ON =红色,  0.64W, 0.04A
  • G ON =绿色,  0.64W, 0.04A
  • B+R ON =紫色,  1.28W, 0.08A
  • B+G ON =青色,  1.28W, 0.08A
  • R+G ON =黄色,  1.28W, 0.08A
  • B+R+G ON =白色,  1.92W, 0.12A