Flight Controller F722-PX
STM32F722, MPU6000, BMP280, Pixel OSD, 32M flash Blackbox, 10x PWM outputs, 6x UARTs, I2C, BEC 5V and 8V, 3~8S supported
Barometer
We have been starting to replace BMP280 with high precision and low noise barometer DPS310 in new batch of production.
If barometer on your flight controller don’t work by default after flashing it with Betaflight, Pls click “firmwares” button below to check out customized Betaflight 4.2.x and tips.
Gallery
Spec.& Manual
F722-PX Quick Start Guide (PDF 15M)
FC Specifications
- MCU: 216MHz STM32F722RET6
- IMU: MPU6000 (SPI)
- Baro: BMP280 (I2C)
- OSD: Pixel OSD/FrskyOSD (Uart6)
- Blackbox: 32M-byte Flash memory (SPI)
- 6x Uarts with built-in inversion
- 1x Softserial_Tx option
- 10x Dshot/PWM outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, AirSpeed)
- 1x SH1.0_8pin connector (Vbat/G/Curr/Rx3/S1/S2/S3/S4)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Switchable Dual Camera Inputs
- Switchable 5V/8V for VTX
- PWM camera control: Yes
- TR/SA VTX control: Yes
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
- Analog Airspeed sensor: Yes
- Digital Airspeed sensor: Yes
Power
- Input: 9~36V (3~8S LiPo)
- BEC: 5V 2A cont. (Max.3A)
- BEC: 8V 2A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- Battery Voltage Sensor: 1:10 (Scale 110)
- No Current Sensor built-in
FC Firmware
- BetaFlight unified target: MATEKF722HD(MTKS)
- INAV target: MATEKF722PX
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 36 x 5 mm
- Weight: 6.5g
Including
- 1x FC F722-PX
- 6x Silicon grommets M4 to M3
- 1x SH1.0_8pin cable 5cm
- 2x SH1.0_8pin connectors
Layout
Wiring-multirotors
Wiring-plane
Wiring-DJI
PWM outputs
| INAV Airplane | INAV Multirotor | BF Multirotor | ||
| S1 | Motor | Motor | Motor | TIM8 |
| S2 | Motor | Motor | Motor | |
| S3 | Servo | Motor | Motor | TIM3 |
| S4 | Servo | Motor | Motor | |
| S5 | Servo | Motor | Motor | |
| S6 | Servo | Motor | Motor | |
| S7 | Servo | Motor | Motor | TIM2 |
| S8 | Servo | Motor | Motor | |
| S9 | Servo | Servo | Servo | TIM4 |
| S10 | Servo | Servo | Servo |
Review
Tips
- F722-PX has INAV firmware preloaded for QC.
- If you use Betaflight, flash it with BetaFlight firmware in DFU mode.
- Select “MATEKF722HD” in pull-down list of BetaFlight configurator when you flashing it.
- BetaFlight configurator 10.7 has supported FrskyOSD protocol, You need to enable “OSD(Frsky Protocol)” on Uart6.
- In BetaFlight CLI mode, type ” resource SERIAL_TX 11 A02 ” if you want to use TX2 pad as softserial1_TX.
***
- no graphical elements in BF firmware for now.
***
- Only Artificial Horizon is graphical in INAV firmware 2.5.
- INAV firmware has FrskyOSD enabled on Uart6 by default, Do not change the settings on Uart6.
- If there are black spots on screen, try uploading font into FrskyOSD via INAV configurator.
***
- FrskyOSD APP and fw 2.0.0
- https://github.com/FrSkyRC/PixelOSD/tree/master/firmware
- Update: The Github repository has been removed by Frsky. You might download the APP and fw from our website. FrSky_OSD-win64.zip
Resellers
Including but not limited to
- Banggood
- bouldermultirotor.com (USA)
- costruzionedroni.it (Italy)
- flyingmachines.de (Germany)
- Getfpv.com(USA)
- HeliDirect.com (USA)
- HobbyRC.co.uk (UK)
- Phaserfpv.com.au (AU)
- progressiverc.com (USA)
- QuadJunkie.co.nz (NZ)
- racedayquads.com (USA)
- RCFlight.se (Sweden)
- rcmaniak.pl (Poland)
- rotorgeeks.com (CA)
- TokoHeli (Indonesia)
- unmannedtechshop.co.uk (UK)
